兼容光模塊

標準協議光模塊

技術支持

兼容協議光模塊

其它種類光器件

安華高 Embedded光模塊

安華高 Embedded光模塊

The AFBR-77D4SZ and AFBR-78D4SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector.

安華高Avago SFP光模塊

AFBR-57F5xMZ

 AFBR-57F5xMZ
            The Avago AFBR-57F5xMZ is an optical transceiver module that supports high speed serial links over multi-mode optical fiber at signaling rates up to 14.025 Gb/s (the serial line rate of 16GFC). The product is compliant with Small Form Pluggable industry agreements SFP and SFP+ for mechanical and low speed electrical specifications. High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-5.

FT AFBR-79EBPZ

AFBR-79EBPZ

AFBR-79EBPZ

40G Bidirectional MMF QSFP+ Transceiver ModuleThe Avago AFBR-79EBPZ is a 40 Gigabit Ethernet (40G) bidirectional (BiDi) multimode fiber (MMF) QSFP+ transceiver module designed for high-speed data center interconnect and enterprise networking applications. Based on proprietary 2x20G BiDi optics, the module enables four Tx and four Rx 10G electrical data lanes to transmit over a 2-fiber LC duplex cable, providing a cost-effective upgrade path from 10G to 40G Ethernet leveraging existing 10G MMF cabling infrastructure.

The AFBR-79EBPZ supports 40G data transfer over 100 meters of OM3 fiber or 150 meters of OM4 fiber. The module is compliant to
40G XLPPI electrical specification per IEEE 802.3ba-2010 and QSFP+ SFF-8436 specification.

AFBR-79EQDZ

AFBR-79EQDZ

The Avago Technologies AFBR-79EQDZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) application. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IBDDR) and 4 x 2.5G IB single data rate (10G-IB-SDR) applications as well.

FT  AFBR-821VxyZ

AFBR-821VxyZ

AFBR-821VxyZ
 
       The AFBR-821VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver fiber optic modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
 The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn  connector.

AFCT-5710ALZ

 AFCT-5710ALZ 

          The  AFCT-5710ALZ  family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

The  AFCT-5710ALZ  family targets applications requiring DMI, while the   AFCT-5710ALZ  family is streamlined for those applications where DMI is not needed.

 

FT AFCT-5710Z

AFCT-5710Z

AFCT-5710Z

          The AFCT-5710Z family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

The AFCT-5710Z family targets applications requiring DMI, while the AFCT-5710Z family is streamlined for those applications where DMI is not needed.

 FT AFCT-575xZ

AFCT-575xZ

 AFCT-575xZ

      The Avago  AFCT-575xZ  family of SFP optical transceivers for OC12/STM-4 offers many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.The  AFCT-575xZ family targets applications requiring DMI features, and the  AFCT-575xZ  family is streamlined for those applications where DMI features are not needed.

FT  AFCT-5765NLZ

AFCT-5765NLZ

 AFCT-5765NLZ

       The Avago AFCT-5765NLZ family of SFP optical transceivers for OC3 applications offer many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch. The  AFCT-5765NLZ family targets applications requiring DMI features, and the  AFCT-5765NLZ family is streamlined for those applications where DMI features are not needed.

FT  AFCT-89WDDZ

AFCT-89WDDZ

AFCT-89WDDZ

The Avago Technologies AFCT-89WDDZ is a Four-Channel duplex, Pluggable, single mode Fiber-Optic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125 GBd and conforms to the 100GE CAUI-4 electrical interface.

FT  AFCT-89WDDZ

AFCT-89WDDZ

 AFCT-89WDDZ

            The Avago Technologies AFCT-89WDDZ is a Four-Channel duplex, Pluggable, single mode Fiber-Optic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125 GBd and conforms to the 100GE CAUI-4 electrical interface.

 Per channel transmitter and receiver retimers, configured for 4x25G operation, can be bypassed to enable reduced power or alternative data rate transmission.
 Link distances up to 2km using SMF optical fiber are supported. These modules are designed to operate over single mode fiber systems using four coarse WDM wavelengths nominally at 1271nm, 1291nm, 1311nm and 1331nm. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional LC duplex optical connector. This module incorporates Avago Technologies proven integrated circuit and DFB technology to provide reliable long life, high performance, and consistent service.

 FT HFBR-53A5VEMZ

HFBR-53A5VEMZ

 HFBR-53A5VEMZ 

         The HFBR-53A5VEMZ optical transceivers from Avago Technologies allow the system designer to implement a range of solutions for multimode Gigabit Ethernet applications.

The overall Avago optical transceiver product consists of three sections: the transmitter and receiver optical subassemblies, an electrical subassembly, and the package housing which incorporates a duplex SC connector receptacle.

ABCU-57xxxxZ

ABCU-57xxxxZ 

      The ABCU-57xxxxZ family of electrical transceivers from Avago Technologies offer full-duplex throughput of 1000 Mbps by transporting data over shielded and unshielded twisted pair category 5 cable with 5-level PAM (Pulse Amplitude Modulation) signals.The Avago Technologies 1000BASE-T module takes signals from both the twisted pair category 5 cable and the SerDesinterface. Pin count overhead between the MAC and the PHY is minimized, and Gigabit Ethernet operation is achieved with maximum space savings.

FT  AFBR-570xZ

AFBR-570xZ

AFBR-570xZ 
      The AFBR-570xZ family of SFP optical transceivers offers the customer a wide range of design options, including optional DMI features (further described later), two temperature ranges (extended or industrial), and choice of standard or bail delatch. The AFBR-5705Z family targets those applications requiring DMI features. The AFBR-5701Z family is a streamlined product designed for those applications where DMI features are not needed.

FT AFBR-5710LZ

AFBR-5710LZ

AFBR-5710LZ 

         The Avago AFBR-5710LZ family of gigabit ethernet SFP optical transceivers offers the customer a wide range of design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

FT  AFBR-5710Z

AFBR-5710Z

 AFBR-5710Z

       The Avago  AFBR-5710Z  family of SFP optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges, and choice of standard or bail delatch.The  AFBR-5710Z family targets those applications requiring DMI features. The  AFBR-5710Z  family is a streamlined product designed for those applications where DMI features are not needed.

AFBR-571xZ

AFBR-571xZ 

        The Avago AFBR-571xZ  family of SFP optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges, and choice of standard or bail delatch.

The  AFBR-571xZ   family targets those applications requiring DMI features. The AFBR-571xZ  family is a streamlined product designed for those applications where DMI features are not needed.

FT  AFBR-5922ALZ

AFBR-5922ALZ

 AFBR-5922ALZ

          The Avago AFBR-5922ALZ is a high performance, cost-effective SFF optical transceiver for serial optical data communication applications supporting 2.125 and 1.0625 Gb/s data rates. This module is designed for multimode fiber and operates at a nominal wavelength of 850 nm. The transceiver incorporates 3.3VDC compatible technology including an 850nm VCSEL transmitter. The AFBR-5922ALZ offers maximum design flexibilty enabling Fibre Channel designers and system integrators to implement a wide range of solutions for multimode Fibre Channel applications. This product is fully compliant with all equipments meeting the Fibre Channel FC-PI 200-M5-SN-I and 200-M6-SN-I 2.125 GBd specifications, and is compliant with the Fibre Channel FC-PI 100-M5-SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2 100-M6-SN-I 1.0625 GBd specifications. The AFBR-5922ALZ is also compliant with the SFF Multi Source Agreement (MSA).

AFBR-59M5LZ

AFBR-59M5LZ

Avago’s  AFBR-59M5LZ  optical transceiver supports high-speed serial links over multimode optical fiber at signaling rates up to 2.125 GBd. Compliant with the Small Form Factor (SFF) Multi Source Agreement (MSA) 2x5/2x10 mechanical specifications for LC Duplex transceivers, ANSI Fibre Channel FC-PI and IEEE 802.3 for gigabit applications the part is electrically interoperable with 2x5 and 2x6 conformant devices. The AFBR-59M5LZ is dimensionally compliant with the SFF MSA form factor with the exception of two additional pins for communicating with the diagnostic interface.

FT AFBR-7705EKZ

AFBR-7705EKZ

AFBR-7705EKZ

          The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-775BxxxZ/785BxxxZ pluggable parallel fiber optic modules. The application note describes the details of the evaluation kit , AFBR-7705EKZ (Transmitter Board) and AFBR-7805EKZ (Receiver Board) as well as some recommended test configurations and equipment that should be used during module evaluation.

 MicroPOD 12x10G Transmitter Module (300m)

AFBR-77D13SZ

AFBR-77D13SZ
 
The  AFBR-77D13SZ is a 12-channel pluggable, parallel fiber optics transmitter module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-77D13SZ and AFBR-78D13SZ are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

The optical interface requires a user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

FT MicroPOD 12x10G Receiver Module

AFBR-77D1SZ

AFBR-77D1SZ
 
The AFBR-77D1SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver fiber optic modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
 The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM Light Turn connector.

MicroPOD 12x12.5G Receiver Module

AFBR-77D2SZ

AFBR-77D2SZ 

The AFBR-77D2SZ  are 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. 

FT MicroPOD Embedded Optical Modules

AFBR-77D4SZ

AFBR-77D4SZ
      The AFBR-77D4SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

MicroPOD 12x14G Receiver Module

AFBR-77D4SZ

AFBR-77D4SZ

The AFBR-77D4SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

FT  MicroPOD 12x10G Receiver Module (300m)

AFBR-78D13SZ

MicroPOD 12x10G Receiver Module (300m)
 
The Avago AFBR-78D13SZ is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-77D13SZ and AFBR-78D13SZ are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
The optical interface requires a user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

MicroPOD 12x10G Transmitter Module

AFBR-78D1SZ

AFBR-78D1SZ
 
      The   AFBR-78D1SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

AFBR-79E3PZ

QSFP+ 3SR4 Pluggable Optical Transceiver Module for 10G and 40G Ethernet Applications

        The Avago AFBR-79E3PZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated pull tab for 40 Gigabit Ethernet (40GbE) applications supporting extended link distance up to 300 m (400 m) using OM3 (OM4) multimode fiber (MMF). The device is capable of inter-operating with IEEE 10GBASE-SR compliant products that can manage higher incoming optical power.   The AFBR-79E3PZ is a high performance transceiver module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density 10 Gigabit Ethernet applications. It allows optical interoperability up to 300 m (400 m) using OM3 (OM4) MMF with any 10 Gigabit Ethernet (10GbE) transceivers, compliant to the IEEE 802.3ae 10GBASE-SR specifications with a minimum 1 dBm of receiver overload. It provides an effective port count of over 100 within 1 RU rack. The pull tab facilitates the insertion and extraction of the device in high port density environment. The device is designated as an QSFP+ 3SR4 solution, where the digit "3" represents 300m link distance using OM3 MMF. The AFBR-79E3PZ  is designed to operate over MMF systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 8 or 12 fiber MTP (MPO) connector. The module incorporates Avago's proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-79E3PZ

AFBR-79E3PZ

AFBR-79E3PZ

 The Avago AFBR-79E3PZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated pull tab for 40 Gigabit Ethernet (40GbE) applications supporting extended link distance up to 300 m (400 m) using OM3 (OM4) multimode fiber (MMF). The device is capable of inter-operating with IEEE 10GBASE-SR compliant products that can manage higher incoming optical power.   The AFBR-79E3PZ is a high performance transceiver module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density 10 Gigabit Ethernet applications. It allows optical interoperability up to 300 m (400 m) using OM3 (OM4) MMF with any 10 Gigabit Ethernet (10GbE) transceivers, compliant to the IEEE 802.3ae 10GBASE-SR specifications with a minimum 1 dBm of receiver overload. It provides an effective port count of over 100 within 1 RU rack. The pull tab facilitates the insertion and extraction of the device in high port density environment. The device is designated as an QSFP+ 3SR4 solution, where the digit "3" represents 300m link distance using OM3 MMF. The AFBR-79E3PZ  is designed to operate over MMF systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 8 or 12 fiber MTP (MPO) connector. The module incorporates Avago's proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-79EAPZ

AFBR-79EAPZ

AFBR-79EAPZ

          The Avago AFBR-79EAPZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) and InfiniBand applications. The device is a high performance transceiver for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules support 4x10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4x5G IB dual data rate (20G-IB-DDR) and 4x2.5G IB single data rate (10G-IB-SDR) applications as well.

AFBR-79EBPZ

AFBR-79EBPZ

      The Avago AFBR-79EBPZ is a 40 Gigabit Ethernet (40G) bidirectional (BiDi) multimode fiber (MMF) QSFP+ transceiver module designed for high-speed data center interconnect and enterprise networking applications. Based on proprietary 2x20G BiDi optics, the module enables four Tx and four Rx 10G electrical data lanes to transmit over a 2-fiber LC duplex cable, providing a cost-effective upgrade path from 10G to 40G Ethernet leveraging existing 10G MMF cabling infrastructure.

 The AFBR-79EBPZ supports 40G data transfer over 100 meters of OM3 fiber or 150 meters of OM4 fiber. The module is compliant to 40G XLPPI electrical specification per IEEE 802.3ba-2010 and QSFP+ SFF-8436 specification.

AFBR-79EIDZ

AFBR-79EIDZ 

 The Avago Technologies AFBR-79EI(D)Z is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) applications with added capability of inter-operating with IEEE 10GBASE-SR compliant products. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.

It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density 10 Gigabit Ethernet application to allow effective port count of over 100 within a 1 RU rack. It allows optical interoperability with any 10 Gigabit Ethernet (10GbE) transceiver, compliant to the IEEE 802.3ae 10GBASE-SR specifications, of form factors such as SFP+, XFP and X2.

FT AFBR-79EIPZ

AFBR-79EIPZ

AFBR-79EIPZ
The Avago Technologies AFBR-79EIPZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) applications with added capability of inter-operating with IEEE 10GBASE-SR compliant products. It also supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IB-DDR) and 4 x 2.5G IB single data rate  (10G-IB-SDR) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density  10 Gigabit Ethernet application. It Allows optical interoperability with any 10 Gigabit Ethernet (10GbE) transceivers, compliant To the IEEE 802.3ae 10GBASE-SR specifications, of form factors such as SFP+, XFP and X2, to Provide  effective port count of over 100 within 1 RU rack. The push-pull tab facilitates the insertion and extraction of these transceivers in such high density environment. This transceiver is designated as a QSFP+ iSR4 solution, where the letter “i” represents interoperability between this QSFP+ transceiver with any 10GBASE-SR compliant modules.

AFBR-79EQDZ

AFBR-79EQDZ 

 The Avago Technologies AFBR-79EQDZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber.

FT AFBR-7IERxxZ

AFBR-7IERxxZ

AFBR-7IERxxZ

       The Avago AFBR-7IERxxZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Active Optical Cable (AOC) to 4x SFP+ Active Optical Cable break-out solution.  This “Octopus” cable is intended for 40G to 4x 10G applications.
The AFBR-7IERxxZ  is a high performance cable for short-range multi-lane data communication and interconnect applications.  It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps. These cables also support 4x10G InfiniBand QDR applications and are backward compatible to the 4x5G IB DDR and 4x2.5G IB single IB SDR applications.

FT AFBR-811vx3Z

AFBR-811vx3Z

AFBR-811vx3Z
         The Avago AFBR-811vx3Z is a 12-channel pluggable, parallel fiber optics transmitter module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters.

MiniPOD 12x14G Receiver Module

AFBR-814VxyZ

AFBR-814Vxy Z 

        The AFBR-814Vxy Z  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications.  These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

FT AFBR-814VxyZ

AFBR-814VxyZ

AFBR-814VxyZ

       The AFBR-814VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications.  These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

FT AFBR-821FxyZ

AFBR-821FxyZ

AFBR-821FxyZ

        The AFBR-821FxyZ  are a set of 12-channel, pluggable, parallel fiber optics trasmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications.  These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

 FT Avago AFBR-821vx3Z

AFBR-821vx3Z

Avago AFBR-821vx3Z
       The Avago AFBR-821vx3Z is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-811vx3Z and AFBR-821vx3Z are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications.

FT AFBR-822RxyZ

AFBR-822RxyZ

AFBR-822RxyZ 
          The  AFBR-822RxyZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. 

[12  >>  
全國產化光模塊 CFP2光模塊 JYSK光纖連接器 思科光模塊 Marconi光模塊 Test Equipment & Others 光纖法蘭適配器
SFP全國產光模塊 CFP4光模塊 J599III電連接器 思科FE SFP 博達光模塊 保偏光器件 光纖跳線&尾纖
1x9全國產光模塊 CFP8 400Gbps S6矩形連接器 思科SFP+光模塊 網件光模塊 In-line Depolarizer FTTA拉遠基站光纖跳線
特種光模塊 CDFP 400Gbps S7矩形連接器 思科XFP光模塊 Nortel光模塊 In-line Polarizer MPO/MTP高密度系列
25G~400G高速光模塊 MicroQSFP光模塊 GYM光纖連接器 思科CFP光模塊 Moxa光模塊 IPBC/S 軍用野戰防水光纖跳線
200km超長距光模塊 DSFP光模塊 J599III光纖連接器 思科QSFP-DD 光模塊 海康威視HIKVISION光模塊 PBC/S 特種光纖光纜
5G移動通信光模塊 FT-61光模塊 水密光纜連接器 思科QSFP+光模塊 McAfee光模塊 PM BPF 特種線纜組件
SFP光模塊 OLT光模塊 光纖連接器轉接器 思科GE SFP SMC智邦光模塊 PM Circulator 通用光纜光纖跳線
1.25G SFP ONU光模塊 FT-A4系列連接器 思科SFP OC3 安華高Avago光模塊 PM Collimator MXC? 多芯光纜組件
CWDM SFP PLCC光模塊 USB光纖延長線 思科SFP OC12 安華高Avago 1x9光模塊 PM Coupler PRIZM? LIGHTTURN?組件
DWDM SFP RJ光模塊 HDMI 思科SFP OC48 安華高Avago SFF光模塊 PM CWDM 光纖機箱
BIDI-SFP SFF光模塊 特種電連接器 思科GBIC光模塊 安華高Avago SFP光模塊 PM DWDM SMA-特殊纖芯系列
SGMII SFP SNAP12光模塊 圓形連接器 思科X2光模塊 安華高Avago QSFP28 光模塊 PM Faraday mirror 特殊接頭系列
Video SFP光模塊 USOT光模塊 矩形電連接器 思科XENPAK光模塊 安華高Avago QSFP+光模塊 PM Fiber mirror 鎧裝系列
Copper SFP X2光模塊 特種光纖光纜 華三光模塊 安華高Avago SNAP12光模塊 PM Filter Coupler 光耦合器Coupler
低功耗SFP Xenpak光模塊 特種光纖 華三SFP 安華高Avago 其他光模塊 PM Fused Coupler 皮纖跳線系列
SFP+光模塊 光電編碼器模塊 光纖器件 華三SFP+ 安華高 Embedded光模塊 PM FWDM 大芯數系列
CWDM SFP+ 光模塊測試板 特種光纜及光纜組件 華三SFP28 光模塊 安華高Fiber Optics光模塊 PM Isolator 回路跳線系列
DWDM SFP+ 光模塊籠子座子 光藕 華三QSFP+光模塊 Industrial Transmitters and Receivers PM Isolator WDM 保偏光纖系列
BIDI SFP+ DAC 高速線纜 標準光耦 華三QSFP28 光模塊 Optical Transceivers PM PLC 光通信組件
Tunable SFP+ 光纖滑環|光電滑環 SMA測試線纜 華三 CFP光模塊 飛通光模塊 PM Tap Isolator 光隔離器isolator
16GFC SFP+ 光纜車 OSA 華三 CXP光模塊 Finisar光模塊 PM Tap Isolator WDM 其它光器件
25GE SFP+ 軍品級DIN光模塊 PON BOSA 華三 CX4高速電纜 菲尼薩Finisar SFF光模塊 PM VOA 可調濾波器
32GFC SFP+ 塑料光纖模塊 Pigtailed PD 華三XFP yellobrik SDI光模塊 其它保偏器件 可調衰減器
SFP28光模塊 替換安華高工業電力光模塊 RFoG BOSA 華三GE SFP 羅克韋爾AB光模塊 光分路器 拉錐耦合器
SFP56光模塊 兼容國產化替換安華高光耦 TO-CAN 華三FE SFP 羅杰康光模塊 FBT拉錐分路器 無源光器件
SFP-DD光模塊 射頻光模塊 光纖溫度傳感器 華三SFP STM-4 研華Advantech光模塊 PLC 光分路器 法拉第旋轉鏡
QSFP光模塊 微型多路光模塊 光纖應變傳感器 華三SFP STM-16 全國產化光器件 PLC平面波導光分路器 波分復用器
QSFP+ 光模塊 特種光模塊 光纖加速度傳感器 華三GBIC光模塊 FT-XS系列 國產化半導體光放大器 光開關 AWG DWDM波分復用器
QSFP28光模塊 HPC并行光模塊 光線壓力傳感器 華三BIDI光模塊 光纖陣列系列 探測器 Fused WDM波分復用器
QSFP56光模塊 LC-RJ超小型單路光模塊 光纖位移傳感器 華三XENPAK光模塊 高速模塊微連接 光功率計 FWDM波分復用器
QSFP112 400G光模塊 LCC48光模塊 光纖應力傳感器 華三EPON OLT SFP 相干通訊光連接 全光纖相位拉伸器 Mini微型粗波分復用器
QSFP224光模塊 LC超短型光模塊 光纖傳感分析儀 中航光電光模塊 硅光子器件光鏈接 光纖準直器 光分插復用器
QSFP-DD光模塊 SNAP12光模塊 光纖分布式測溫主機 中興光模塊 Bio-Medical Equipment 光衰減器系列 其它種類波分復用器產品系列
QSFP-DD800光模塊 微型光模塊 光纖布里淵信號解調儀 銳捷光模塊 Components for Fiber Laser 光偏振控制器 密集波分復用器
OSFP 400Gbps 微型可插拔BGA光模塊 分布式光纖聲振信號解調儀 惠普光模塊 Components for Fiber sensing 光源 粗波分復用器
OSFP 800G光模塊 表貼式單路光模塊 Camera Link 神州數碼光模塊 Components for Optical Network 光環行器Circulator WDM模塊
OSFP 1.6T光模塊 特種光纖連接器 光模塊知識 Juniper光模塊 EDFA光纖放大器 光纖延遲線 濾波器
HSFP 1.6T~12.8T光模塊 J599光纖插頭插座 華為光模塊 Extreme光模塊 光纖傳感器 色散補償模塊 蝶形激光器
XFP光模塊 ODC光纖連接器系列 華為GE SFP Brocade光模塊 High power Component 光纖放大器 光耦合器&分路器
CWDM XFP 其他特種光纖連接器 華為QSFP+光模塊 D-Link光模塊 HP In-line Polarizer 無源傳輸轉換器 光纖環形器&法拉第旋轉鏡
DWDM XFP 野戰光纖連接器 華為SFP+ 赫思曼光模塊 HP Isolator 光纖激光器 光纖隔離器&波分復用器
BIDI XFP 特種光電連接器 華為QSFP28 阿爾卡特朗訊光模塊 HP PBC/S 光調制器 光纖分束器&合束器(PBS/PBC)
1x9光模塊 J599III高低頻混裝連接器 華為FE SFP Allied Telesis光模塊 Pump Combiner 光電探測器 光纖光柵
CSFP光模塊 NGC光纖連接器 華為XFP Foundry光模塊 HP Circulator 光纖偏振 高速線纜
CSFP+10G光模塊 J599A6光纖連接器 華為SFP OC12 Force10光模塊 Pump laser protector 光纖濾波器
CXP光模塊 GYMB光纖連接器 華為GBIC光模塊 Blade光模塊 Hybrid for EDFA 同軸激光器
CFP光模塊 J599III光電連接器 華為SFP STM16 Linksys光模塊 Test Equipment & Others 同軸電纜

028-85255257 | sales@f-tone.com

標準協議光模塊產品

兼容協議光模塊

其它種類光器件

技術支持