The FT-88-0601 devices each consists of an infrared emitting diode optically coupled to a high speed integrated photo detector logic gate with a strobable output.The devices are packaged in an 8-pin small outline package which conforms to the standard SO8 footprint.
Description The ACPL-332J optocoupler is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement.
The ACPL-333J optocoupler is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement.
The ACPL-337J is a fully featured 4.0A smart gate drive optocoupler device capable of driving high power MOSFET or IGBT directly. The device features rail-to-rail output with high current, integrated LED driver, active Miller clamp, high desaturation (DESAT) blanking current source, and Under Voltage Lock-Out (ULVO) feedback control circuit, providing a complete cost-effective gate drive solution for motor control and power inverter applications.
The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.
The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.
The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.
The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems.
The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems.
The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems.
The ACPL-P341/ACPL-W341 gate drive optocoupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This gate drive optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
The ACPL-P34X/W34X evaluation board allows a power inverter designer to easily test the drive, rail-to-rail and speed capability of the ACPL-P343/W343 gate drive optocoupler.
The ACPL-P341/ACPL-W341 gate drive optocoupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This gate drive optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
The ACPL-P34X/W34X evaluation board allows a power inverter designer to easily test the drive, rail-to-rail and speed capability of the ACPL-P343/W343 gate drive optocoupler.
Description The HCPL-3120 contains a GaAsP LED while the HCPL-J312 and the HCNW3120 contain an AlGaAs LED. The LED is optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
Description The HCPL-314J family of devices consists of an AlGaAs LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.
Description Avago’s 2.5 Amp Gate Drive Optocoupler with Integrated Desaturation (VCE) Detection and Fault Status Feedback makes IGBT VCE fault protection compact, affordable, and easy-to-implement while satisfying worldwide safety and regulatory requirements.