+86-028-85255257
40GBASE-LR4 QSFP+ Transceiver for SMF, 10km
Product Description
F-tone Networks ALQ10-LR4-10 QSFP+ Module supports link lengths of up to 10km over a standard pair of G.652 single-mode fiber with LC Connector. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed within the device.It combines the higher density attractions of parallel modules with some of the key advantages normally associated with SFP+ based modules. It is intended for use short reach applications in switches, routers, and data center equipment where it provides higher density and lower cost when compared with standard SFP+ modules. The module operates with single +3.3V power supply. LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode, are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
Features:
● 4 CWDM lanes MUX/DEMUX design
● Up to 10km transmission on single mode fiber (SMF)
● Up to 11.2Gbps data rate per wavelength
● QSFP+ MSA compliant
● Maximum 3.5W operation power
● Operating case temperature: 0ºC~70ºC
● RoHS-6 compliant
Applications:
● 40G Ethernet
● Infiniband interconnects
● 40G Telecom connections
Order Information:
Description |
Data Rate |
Wavelength |
Reach |
Connector |
Fiber Type |
TX Power (dBm) |
Rx Sens. (dBm) |
Temp. Range(°C) |
QSFP+ SR4 |
44.8Gbps |
850nm |
150 m |
MTP/MPO |
MMF |
-7.6~1 |
< -9.5 |
0~70 |
QSFP+ eSR4 |
44.8Gbps |
850nm |
300 m |
MTP/MPO |
MMF |
-7.3~1 |
< -9.9 |
0~70 |
QSFP+ BIDI |
44.8Gbps |
850nm/890nm |
100m on OM3 / 150m on OM4 |
LC |
MMF |
-0.5~3.6 |
< -4.5 |
0~70 |
QSFP+ LX4 |
44.8Gbps |
1310nm |
100m on OM3 / 2km on SMF |
LC |
MMF/SMF |
-7~2.3 |
< -9.6 |
0~70 |
QSFP+ IR4 PSM |
44.8Gbps |
1310nm |
1.4 km |
MTP/MPO |
SMF |
-5.5~1.5 |
< -11.5 |
0~70 |
QSFP+ LR4 PSM |
44.8Gbps |
1310nm |
10 km |
MTP/MPO |
SMF |
-5.5~1.5 |
< -12.6 |
0~70 |
QSFP+ IR4 |
44.8Gbps |
CWDM |
2 km |
LC |
SMF |
-7~2.3 |
< -11.7 |
0~70 |
QSFP+ LR4 |
44.8Gbps |
CWDM |
10 km |
LC |
SMF |
-7~2.3 |
< -13.7 |
0~70 |
QSFP+ ER4 |
44.8Gbps |
CWDM |
30 km |
LC |
SMF |
-3.7~4.5 |
< -20.2 |
0~70 |
FDR QSFP+ SR4 |
56Gbps |
850nm |
100M on OM3 / 150M on OM4 |
MTP/MPO |
MMF |
-8.2~2.4 |
<-11 |
0~70 |
Important Notice
Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.