The FT-BE-F8505 SFP+ transceiver is intended for eSR reach service from 25.78Gb/s 850nm multi mode high-speed communications equipment where low-cost, extraordinary performance and reliability are essential. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range. It is compliant with SFF-8431 and SFF-8432. The low jitter and low bit error rate optical assembly features a 850nm VCSEL laser transmitter and PIN/TIA receiver. It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), MOD_ABS and Tx Disable (Tx_DIS) monitor and control functions. The differential AC coupled Tx and Rx data interfaces are CML compatible. 

Features
● LC Duplex optical interface
● Reach:
     300m on OM3 MMF
     400m on OM4 MMF
● Bit rate:25.78Gb/s
● +3.3 V power supply
● Low DC power consumption
● 2x10 SFP+ MSA compliant package
● Hot swappable
● High performance 850 nm VCSEL laser
● High sensitivity PIN/TIA optical receiver
● Multi Mode operation
● Case Operating temperature range:
     Commercial: 0 to 70ºC
● Data and Control Interfaces:
     Tx Data CML/AC Coupled
     Rx Data CML/AC Coupled
     Tx_DIS LVTTL
     Tx_FAULT LVTTL
     Rx_LOS LVTTL
     MOD_ABS LVTTL
● 2-wire I2C data bus
● RoHS compliance

注：本產(chǎn)品有全國產(chǎn)化型號可選
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.