+86-028-85255257
F-tone’s FTCS-L1312-02X series of transceiver modules are the perfect solution for high-speed communication networks.FTCS-L1312-02X series modules provide reliability, robust and high performance to Telecom, Datacom, and other data communication applications.F-tone’s FTCS-L1312-02X SFP transceivers support data rates from 100Mbps to 200Mbps. These modules are fully compliant with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). Digital diagnostics functions are available via the 2-wire serial bus specified in the SFP MSA.The family provides a uniform form factor for a wide variety of standard connections to transmission media. The converters can be inserted or removed from a host chassis without removing power from the host system.F-tone’s FTCS-L1312-02X SFP module has been designed to provide good immunity to RF electromagnetic fields and excellent EMC/EMI performance.
Standard : 0 to +70°C
Industrial : -40 to +85°C
Operating of SFP beyond the Absolute Conditions Listed in Table 1 will degrade or damage the products. It’s not implied that the products would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
℃ |
Relative Humidity |
RH |
5 |
95 |
% |
Supply Voltage |
VCC |
0 |
+3.8 |
V |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
||
Supply Voltage |
VCC |
+3.1 |
+3.3 |
+3.5 |
V |
||
Supply Current |
ITX+IRX |
- |
95 |
120 |
mA |
||
Operating Temperature |
Commerce level |
TOP |
0 |
+70 |
℃ |
||
Industry level |
-40 |
+85 |
|||||
Data Rate |
B |
155 |
Mbits/s |
||||
Transmitter Differential Input Voltage |
VTD |
200 |
1800 |
mVP-P |
|||
Signal Outputs |
TX_FAULT |
VOH |
VCC-1.085 |
VCC-0.880 |
V |
||
LOS |
VOL |
VCC-1.830 |
VCC-1.555 |
||||
Signal Inputs |
TX_DISABLE |
VIH |
VCC-2.00 |
VCC-3.50 |
V |
||
MOD_DEF1,2 |
VIL |
VEE +0.00 |
VEE +0.800 |
FTCS-L1312-02X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.1V to 3.5V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
||||||
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Output Center Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
||
Average Optical Output Power |
Po |
-20 |
-17 |
-14 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Power Supply Current |
ICCT |
- |
95 |
120 |
mA |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
||||||
Receiver |
||||||
Receiver Sensitivity |
S |
- |
-32 |
dBm |
||
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Operation Center Wavelength |
λC |
1100 |
1310 |
1650 |
nm |
|
Loss of Signal |
Assert |
LOSA |
-45 |
- |
dBm |
|
Deassert |
LOSD |
- |
-32 |
dBm |
||
LOS Hysteresis |
LOSHYS |
1.0 |
1.8 |
4.0 |
dB |
FTCS-L1312-05 |
MMF,1310(FP LD),5KM,without DDM, 0 to +70°C |
FTCS-L1312-05D |
MMF,1310(FP LD),5KM,with DDM, 0 to +70°C |
FTCS-L1312-05I |
MMF,1310(FP LD),5KM,without DDM, -40 to +85°C |
FTCS-L1312-05DI |
MMF,1310(FP LD),5KM,with DDM, -40 to +85°C |
Note: Specifications subject to change without notice.