SFP+ Transceiver 10GBase-ER 10Gb/s CWDM, 40KM

Product Description
F-tone Networks's series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ZR/ZW), which fully compliant with the specification of SFP+ MSA SFF-8431. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are ten center wavelengths available from 1270nm to 1450nm, with each step 20nm. The module is with the SFP+ connector to allow hot plug capability. The single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal to the receiver. This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472.

Features:
● Operating data rate up to 10.3Gbps
● 1550nm EML Transmitter
● Distance up to 40km over SMF
● Single 3.3V Power supply and TTL Logic Interface
● Duplex LC Connector Interface, Hot Pluggable
● Compliant with SFP+ MSA Specification SFF-8431
● Compliant with IEEE 802.3ae 10GBASE-ER
● Compliant with IEEE 802.3ae 10GBASE-EW
● Compliant with SFF-8472
● Operating Case Temperature Standard: 0oC~+70oC

Applications:
● 10GBASE-ER at 10.31Gbps
● 10GBASE-EW at 9.95Gbps
● 1000 Base-LX Ethernet
● 8x FC at 8.5Gbps
● 4x FC at 4.25Gbbs
● 2x FC at 2.125Gbbs
● 1x FC at 1.0625Gbps
● Other optical links

Order Information:

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.